Page Comparison

...

Valid tags and data tables

The full tag must have 4 levels. The first two are fixed as ddi.infoblox. The third level identifies the type of events sent, and the fourth level indicates the event subtype. 

...

How is the data sent to Devo?

Set up the Devo relay rules

...

Rules	Relay screenshot
DDI Infoblox - DNS Categories Source Port → Customer source port, for example 13004 Source data → ^data → ^.*named\[\d*\]:\s+([\S]+): Target Tag → ddi.infoblox.dns.\\d1 Sent without syslog tag → True Is Prefix → False (by default) Stop processing → True
DDI Infoblox - DNS Category DTC 2 Source Port → Customer source port, for example 13004 Source data → ^named\[\d*\]:\s+request\s Target Tag → ddi.infoblox.dns.dtc Sent without syslog tag → True Is Prefix →False (by default) Stop processing → True
DDI Infoblox - unknown DNS Categories Source Port → Customer source port, for example 13004 Source data → ^(?:import_)?named\[\d*\] Target Tag → ddi.infoblox.dns.unknown Sent without syslog tag → True Is Prefix → False (by default) Stop processing → True
DDI Infoblox - DNS Category DTC 1 Source Port → Customer source port, for example 13004 Source data → ^idns_health Target Tag → ddi.infoblox.dns.dtc Sent without syslog tag → True Is Prefix → False (by default) Stop processing → True

...

1. Select Data Management tab

2. Select the DNS tab

3. Click Grid DNS Properties from the Toolbar

4. Enable de Advanced Mode by clicking on “Toggle Expert Mode” if the editor is in the basic mode.

5. Select the Logging tab

6. Select the Logging Categories you would like to send to Devo.

7. Save & Close

...

After saving the changes, you may be prompted to restart the DNS service for the changes to take effect.

...

1. Select the Grid tab

2. Select the Grid Manager tab

3. Select the Members tab

4. Click Grid Properties from the Toolbar.

5. In the Grid Properties editor, select the Monitoring tab. You will see a window like this below.
   
   
   
   

6. Select “Log to External Syslog Servers” to enable the Infoblox appliance to send messages to a specified Syslog server.

7. Select also the “Copy Audit Log Message to Syslog” so you will be able to send audit logs to Devo.

8. To define a new Devo Relay, click the Add icon and complete the following fields:

   • Address: Devo Relay IP address

   • Transport: Secure TCP, TCP or UDP. If selecting Secure TCP, you will need to configure Stunnel in front of the Devo Relay so Stunnel will decrypt the logs and send them decrypted to the Devo Relay. Here you can read more about integrating Stunnel with the Devo Relay.

     Image RemovedImage Added

   • Interface: at your convenience.

   • Node ID: at your convenience.

   • Source: at your convenience.

   • Severity: at your convenience.

   • Port: Devo Relay port or Stunnel port listening for logs. If using the Infoblox option Transport TCP or UDP you must use the Source port of the relay rules you configured previously. If you selected Secure TCP, then you must enter the Stunnel listening port.

   • Logging category: you must select the option “Send selected categories” and then move to the “Selected” space all the categories you want to send to Devo. The reason for selecting the option “Send selected categories” instead of the option “Send all” is that logs will be prefixed and the Devo parsing will only work for prefixed logs of Infoblox. Read more about Infoblox log prefixes here.

   • Then click on the Add button and you will see the configured Devo Relay as part of the list of Syslog Servers.

     Image RemovedImage Added

   • Save & Close

After saving the changes, you may be required to do a service restart for the changes to take effect. Your Infoblox appliance will start to send Syslog to your Devo Relay.

...