Some advanced parameters can be edited manually in the /opt/devo/ng-relay/conf/relay/maduro.properties file.
# Port where the relay listens for commands from the relay CLI maduro.server.port = 12998 relay.config.file = /opt/devo/ng-relay/conf/relay/relay.properties # Config updater frequency (check for relay config updates in Devo) updater.period.seconds = 60 # CLI test command timeout in seconds test.send.timeout = 15 # Paths for local logs and disk buffering config.buffer.path=/var/logt/buffer config.localLogs.path=/var/logt/local # Spring cron expression to delete local logs # second, minute, hour, day of month, month, day(s) of week config.localLogs.purge.cron = 0 0 3 * * * # Local logs retention time # Format: a positive integer followed by any of: # - d or D (days) # - w or W (weeks) # - m or M (months) # - y or Y (years) config.localLogs.retention.time = 1d
The table below lists the different parameters that you can configure in this file:
Parameter | Description |
|---|---|
maduro.server.port | The local port where the relay listens for commands from the Devo Relay CLI. |
relay.config.file | The file that stores the config of the relay done during the setup process. |
updater.period.seconds | The execution interval of the updater scheduler. |
test.send.timeout | CLI test command timeout in seconds. |
config.buffer.path | The path where the files of the relay disk buffer are stored. |
config.localLogs.path | The path where the local relay logs are stored. |
config.localLogs.purge.cron | Spring cron expression to set when the retention time is applied to the local logs. |
config.localLogs.retention.time | The time when the relay local logs are stored. |
A restart of the ng-relay service is required in order to apply any changes in this file.
sudo systemctl restart devo-ng-relay