auth.cisco

Introduction

The tags beginning with auth.cisco identify events generated by Cisco products.

Tag structure

The full tag must have 3 levels. The first two are fixed as auth.cisco. The third level identifies the type of events sent.

Therefore, the valid tags and tables include:

• auth.cisco.ise

How is the data sent to Devo?

Logs generated by Cisco must be sent to the Devo platform via the Devo Relay to secure communication. See the required relay rules below:

Relay rule 1 - Cisco ISE

Define the following rule in your relay to send logs generated by Cisco Identity Services Engine (ISE):

• Source port → 13011

• Target tag → auth.cisco.ise

• Select the Sent without syslog tag checkbox